LG OLED and 84″ Ultra Definition 3D TV at CES 2012 from Dave the Gadget Guy on Vimeo.

 First we removed the old TV.  That left us with this giant opening.  The width of the cabinet allowed for a 65″ flat panel, but we needed a way to mount it.  We also needed to cover all the empty space below the TV.

Next we built a false back and painted it black.  We installed this inside the cabinet to mount the flat panel. 

Then we designed a new front panel and matched the existing cabinet’s paint to achieve this fantastic final result. Some cabinets require a lot of work, some require only a little. If you are ready to upgrade your TV, let us look at modifying your existing cabinet to acommodate it.

This retrofit installation was rather unique.  The room was large, open, and awkward making the TV placement difficult.  After a couple of designs involving a large custom cabinet to the right of the fireplace to house the TV, it was finally decided that the best place for the TV was over the mantle above the fireplace.   The cabinet idea was kept but redesigned to become bookshelves with cabinets underneath to hold the AV gear.  The builder removed stones creating a pathway for power and AV cabling.  Once the cabling was in place the custom bookshelfcabinet was installed.  The TV was mounted with a tilt mount bracket to provide a better viewing angle.  A receiver, Blu-ray player, DSS receiver and Klipsch subwoofer were installed inside the cabinet.

The client wanted better sound than the TV provided so along with the subwoofer a pair of KEF 6000 ACE speakers were mounted to either side of a 55″ LED TV.  This provided big sound to match a big picture.  An RTI universal remote controls this system and the house wide audio system.  No matter how difficult the installation there is always a solution.

I’ll never tell!

    

  The first step was to run cabling and power to all three TVs and then layout the bracket pattern.   

Once all three TVs were hung and the speakers mounted, we installed the AV gear: a surround receiver, a Blu-ray DVD player and 3 Direct TV satellite boxes.  We used a RTI T3V and a ZRP6 to control the system.  With the T3V, the client can change the channel on any of the TVs and switch the audio to any of the TVs without any crosstalk or inteference.    

The final result - command central for the ultimate sports fan!

Waterproof  Remote

One such product is the RTI U2 universal waterproof remote (Picture on Left).  If you have an outdoor sound system, you can use this remote in conjunction with one of their wireless RF base stations to control your whole sound system. You can literally use this remote in your pool.  I remember the first time I installed one of these remotes I was so excited that it floated that after programming it I put it in the pool to see if it was true.  I came back to test my experiment and saw the remote floating in the center of the pool, far from arms reach.  After locating the net and fishing my remote out…It worked great and controlled the outdoor sound like a champ.

Outdoor Speakers

There are two main types of outdoor speakers, hanging or rock.  Hanging speakers are mostly used on the side of your house or under eaves of your porch.  These speakers are surprisingly robust and have great sound.  Rock speakers are mostly used around pools and landscaped outdoor living areas.  They look cool and sound good too.  People are attracted to these speakers because they blend into their landscape and disappear.  Both of these speaker types are usually installed with an all weather volume control that will let you control the volume of your sound without going inside to your equipment location.

Outdoor Video

Putting a flat panel TV outdoors can get a bit tricky.  The biggest hurdle is trying to prolong the life of a sensitive piece of equipment in the harsh environment of the Texas outdoors.  Often we will install a TV in  a loggia, patio or pool house that provides some shelter for the weather.  Even if the TV is protected from direct rain fall, it is still in an uncontrolled environment and that can significantly shorten its life.  Here are a couple of options to protect and increase the life of your TV.  The first is to get an all weather TV that is designed to be used outdoors.  Pantel and Sunbright have LCD TVs that are great for any outdoor situation, covered or exposed.  Their specially designed TVs are temperature controlled and ventilated.  They are also protected from dust, insects and spider webs, which are very damaging to electronics.

If your are looking for a less expensive option then try pairing an inexpensive flat panel TV with a protective cover.  The covers are designed to provide some protection from dust, insects and moisture when the TV is not in use.  Sound Ideas offer these covers in a variety of colors and sizes to fit any TV.

Hopefully this post helps stir your mind about the options that are available for outdoor entertainment.  There are a ton of things out there to choose from, and I just wanted to get you thinking and give you some basic things that we have done in the recent past.  No matter what you choose to do, the important thing is to get out there with friends and family and enjoy the outdoors!

In their eagerness to sell you something, advertisers tend towards three approaches.  1.  They over simplify the product to highlight a single feature.  2.  They exaggerate or make overboard claims about what the product can do for you.  3.  They include too much information about the product.  Most of it being technical jargon that means nothing to the average consumer.

In the case of the Phillips TV commercial, they chose number 1.  “The TV is flat like a picture.  It can hang on the wall like a picture.  So let’s show some cool young hipsters hanging it on a wall like a picture, and then enjoy watching a flat TV hanging on a wall like a picture! Cool!  Totally Awesome!” 

I see the commercial and think there is no power on the wall for the TV.  There is no cabling for the TV.  There are no video sources in the room for the TV.  Where is the mounting bracket for the TV?  That window is going to cause some wicked glare off that TV.

The coolness of the TV being flat is lost on me because the commercial does not depict the TV in a realistic way.  Am I expected to believe that I can take the TV, hang on the wall and start watching TV?  Really?  C’mon!  Advertise the TV in a real world application and then I might say “Awesome!”

Stephen Hopkins over at CEPro.com feels that Mitchell is blaspheming and counters with the article “Ten Reasons Why 3d Will Succeed.”  He argues each of Mitchell’s points such as stating that 3-D glasses are temporary until auto-stereoscopic technologies develop, but he does not really say why  3-D will succeed.  Hopkins subtitled his article “Why 3D will find an important niche in the home theater experience” but fails to address this at all.

Take a moment to read through the articles.  Both Mitchell and Hopkins make good arguments, but they missed a few.  Here are my top 5 reasons why 3d could go either way.

1.  Avatar looked amazing in 3-D on a giant screen. It was very realistic and totally immersive.  At times I had physical reactions like motion sickness and vertigo because of what was happening on the big screen.  I do not think the move is going to look the same or even come close to achieving the same effect on my 47″ TV.  So how big a TV do you need to have until a 3-D movie or program gives you the same feeling it did in the theater – 50″, 65″, 80″, 100″? 

2.  I already wear glasses to watch TV as do millions of people.  I hate having to put on a second pair to watch a movie in the theater.   Doing that at home just to watch TV?  No way!  If I only had to wear one pair?  Maybe. 

3.  Right now content is limited but that will change.  The bigger question is will 3-D strive to be the standard format or is it going to become a feature used for special events and movies?  Is everything I watch like the local news eventually going to be in 3-D or will only programs like the Super Bowl or the Olympics be broadcast in 3-D?  I think 3-D will be adopted more quickly if only certain programs are in 3-D.   

4.  Gamers will be among the earliest adopters and will become the biggest proponents for 3-D technology.  Gaming, even more so than movies, is all about achieving an immersive experience.  Gamers want to lose themselves in the Game and that is what 3-D does the best. 

5.  The novelty might wear off quickly.  3-D movies have come and gone for decades.  We stand at the cusp where 3-D moves from being a gimmick to a legitimate story telling tool, but for every “Avatar” there will be a dozen “Clash of the Titans.”  Home technology fads come and go – it is too early to tell if 3-D will work in the home.

Here is the before shot. This is a common problem. Notice the large CRT TV that has it’s own base that goes down to the floor. If you wanted to put a flat panel in its place, it would be impossible to find a base that would match.

Above is the after picture. We created a bottom piece that would match the existing cabinet and we mounted the flat panel to a floating false wall. Everything matched  very nicely even though the existing cabinet was a manufactured cabinet with  a weird stain. In the end the cabinet modification we did was seamless and looked like it had always been like that.

Over the past year I have worked with many clients to modify their cabinets. The story is usually the same and it goes something like this. “Ten years ago we had this beautiful cabinet custom made for this specific big screen tube television. Now we want to update to a new flat panel HDTV, but our cabinet was not made for a flat panel. What can we do?” Sometimes the solution to the problem is simple and other times it is not. The above picture is an example of a simple problem. So let’s walk through the solution.

Before any installation takes place we need to come to the job site and take measurements so that we can find what fits just right. Sometimes we will even borrow an existing cabinet door to match paint or stain color. All the preliminary work is done and now it’s the day of installation. First we need to get that beast of a tv out of it’s hole. Next we put up a “false backing” that will match the existing cabinet. Third, we run the necessary cables and set the mount in position. At this point we also install custom trim work, caulk and do touch up painting. We really have an attention to detail at this stage.

The fourth step is to prep the flat panel for the bracket. During this step we align the position so that the gap around the flat panel is even all around the edges. Next, we hook up all cables to flat panel and mount it to the bracket. It is important during this step to work with “kid gloves” because the new HDMI cables are very sensitive to bends and it is easy to scratch or damage the surrounding cabinets while mounting a flat panel. We want everything to look beautiful, so we take great caution mounting any tv.  Finally, we train the client on their new set up and answer any questions they might have. We really work had to make this whole process as painless as possible. The goal is to do the modification in such a way that it looks like it has always been apart of the cabinet.

Now that you have a general idea of the process I will be posting some before and after images from future cabinet modifications. If you have more questions, or you would like me to come to your house to look at your cabinet, just email David and I will get back to you asap.